1 / 3
Wingman 18650 tray (uses stock wingman battery tabs)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed lighter more robust wingman battery tray
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simply remove the golden tabs from the stock battery tray by pressing the two small protruding clips and sliding the metal piece out of the plastic. Then, insert the tabs into the 3D-printed holders.
Print in flexible rigid filament ( I used PETG)