Discharge Chute Hook for Ryobi RM480e electric riding mower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hook to hold up the discharge chute on your Ryobi RM480e mower for storage.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple hook I created that will hold up the discharge chute on a Ryobi RM480e riding mower when it is being stored to prevent the chute from taking up excessive space. It fits into the slot next to the control panel, and will hold the discharge chute in place when it is folded up. For best results, place the hook as far forward in the slot as possible.
WARNING: Do not use this when the mower is in operation.
Printing notes: I have now tested a number of iterations of this model, and based on this I recommend printing with at least 25% infill. The discharge chute has a fairly strong spring on it which puts a lot of strain on the joint and can break it over time. I'm still doing some refinements, and will probably have a version 2 at some point.