1 / 2
XT30 4S and 2S Pigtail and Balance Lead holder — zdjęcie 1
1 / 2

XT30 4S and 2S Pigtail and Balance Lead holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this design to secure the balance lead in place during flights.

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
1
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

I created this model to keep the balance lead secure during flights. I had a loose balance lead shatter one of my propellers once, so I learned my lesson. Feel free to experiment with it and print it however you like it, but here are the settings I used:

  • Layer height: 0.2mm
  • Material: TPU (you really want this to be flexible so you're able to fit the positive and negative wires of the pigtail in place)
  • Wall loops: 2
  • Infill: 10%
  • Infill pattern: 3D Honeycomb

Tagi