1 / 5
Hollow Knight Controller Stand - Seal of Hallownest
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a Hollow Knight controller stand I liked.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 278
- Wydruki
- 0
- Wyświetlenia
- 1349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
I saw u/Prophetforhire's reddit post about the controller stand they made for their girlfriend, loved the idea, and decided to make my own. This version adds three separate slots for the Dreamers, as well as the Seal of Hallownest to the back.
Printed at 0.1mm layer height (both stand and Dreamers), Seal on back filled with acrylic paint. Dreamers were printed facing up (flat side on buildplate), and attached with superglue.