Canik MC9 Magazine Sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleeves to fill in the gap while using longer magazines in your Canik MC9
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 1060
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE: I designed these models using my MC9 with the Taylor Freelance backstrap installed; however, the TF backstrap sticks down more than the stock ones. I'm in the process of updating the models, so anything with "TF" in the name is made for the Taylor Freelance version. If you don't have that installed, choose the "Stock" version. 15 round version is up already.
The MC9 comes with an extended 15 round magazine, but if you are like me and have extra Canik magazines around from other models, these sleeves slide over your magazines and fill in the gap. Unlike the 15 round magazine that comes with the MC9, these also fill in the back area. Just slide them over your magazine; they are pretty tight and will stay in place.
I've built in the support on this which allows for a much cleaner print. Just slide a small screwdriver in the “V” notch between the support and the side and pop it off. Be careful not to push the side laterally as you could break the sleeve; just push the support to the rear and it will pop off and go flying.