Dread Pirate's Contingency - Lynx Family Mag Release Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tool you can use to add the "Dread Pirate's Contingency" Mag Release Lever to the Stock of your Lynx
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Now you can add yet another option for releasing your magazine onto your Lynx. This tool is used to add the appropriate geometry to the Stock component on the Lynx. Look at the screenshot to see where to align the melder tool. Theres also a STEP file of a basic 2.1.0 Lynx Stock with the lever geometry already added in case you don't want to mess with using the melder tool and just want to add your own aesthetic to an existing part.
You'll need to use the included “Nub” and “Triple Release Lever” files when printing your final edited part.
This is not beginner friendly. Please already know what you are doing when altering files. I will not be providing support if you mess something up.
You'll also need the following hardware in order to make this actually function in your own Lynx:
1x M3x12mm Hex Standoff (Triple Release Lever)
2x M3x8mm Pan Head Screw (Triple Release Lever)