Eclíck – 3D Printed, DIY Robotic Panorama Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed robotic panorama head with Arduino/ESP32 control. Automates pan/tilt for timelapse and panoramic photography.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 424
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Eclíck is a fully 3D-printable robotic panorama head designed for DSLR and mirrorless cameras.
It automates precise pan and tilt movements for shooting stunning panoramas or time-lapses.
✅ Open-source project — free to download, modify, and build
🗃 The latest version of the 3D print files is always available here: https://Eclick.org/3dparts.php
🧠 Controlled by Arduino or ESP32, using stepper motors
🖨 Printed in PETG or PLA, no supports needed on most parts
💪 Parts are reinforced with 8mm steel rods for extreme strength and durability
🧩 Designed for easy assembly with off-the-shelf parts (screws, bearings, etc.)
🎯 Ideal for photography, DIY robotics, and maker projects
🎥 See it in action here: https://Eclick.org/video.php#video
💬 Questions or feedback? Drop a comment or check out the full project at:
🌐 https://Eclick.org