Benelli Advanced Impact (A.I.) 12GA Choke Tube Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw together sleeve case to protect your Benelli A.I. 12GA shotgun choke tubes.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
08/29/25 - Uploaded a second version of this model with tighter thread tolerances (a -.15mm face offset instead of a -.25mm face offset). After using several of the original versions for a bit, I didn't like how sloppy the threads felt to me. I've printed a few of these newer ones with the .15mm tolerance in PETG and have been very pleased with them.
This model is a case for a single Benelli Advanced Impact 12GA choke tube.
I usually take a couple of chokes with me when I shoot sporting clays. The Benelli Advanced Impact choke tubes are big - 120mm long and they are essentially a 10GA bore choke and barrel combination. I wanted a case that I could put individual tubes in so I could stuff a couple into my shell pouch and not feel guilty about them banging around into each other or the shells.
This case is designed to be a close fit for the choke tube. I printed a series of cylinders and rings to find out what just the right internal and external diameters were so that the thin end of the choke tube presses juuuuuust right into the bottom of the case for 3mm so that the tube stays nicely in the case.
The thread tolerances are fairly loose. It's a M28x2 thread and I applied a -.25mm face offset to the external threads on the base so they should be forgiving.
In the black version in my photos, I applied a text modifier in Prusa Slicer to add the choke tube information to the cap.
For the full set I printed with the Benelli logo and the choke tube markings, I used Hatchbox Red and Black PETG. The others I printed in Creality Black, IIIDMax Candy Apple Red and Polymaker Olive Brown PLAs. I used an 8mm external brim just to be on the safe side with these taller pieces.