CORE One filament sensor splitter/dual ingress with PC4-M10 fittings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a second ingress channel for the filament.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 2
- Wyświetlenia
- 909
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Update 2025/09/14: new version, with filament path that's easy to push through and threads for PC4-M10 fittings. I've been using it for some time now and it seems to work well.
Replacement for the side filament sensor body with a second filament ingress path.
You can route a 4mm PTFE tube through a gap between CoreXY plate and the front right profile (same as the webcam cable on the left side), and then through one of the gaps where profiles meet in the corner.
Two rectangular holes are for holding it during installation and are sized for the wrench that was included with the printer.