Rugged 12V to 20V Power Adapter for Parkside X20V Team Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power your Parkside X20V Team tools from any 12V source with this heavy-duty adapter.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 442
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rugged 12V to 20V Power Adapter for Parkside X20V Team Tools (WAGO & Heat-Set Insert Version)
Summary
Power your Parkside X20V Team tools from any 12V source with this heavy-duty adapter. Whether you're using a car battery, a large 12V Li-Ion/LiPo battery, or a lab bench power supply, this adapter lets you run your tools continuously without swapping batteries.
This design is engineered for durability and ease of assembly. The modular three-part enclosure is reinforced with brass heat-set inserts, and the wiring is simplified using a clean and reliable WAGO lever-nut connector. It houses a high-power DC-DC boost converter, stepping up the voltage from 12V to a stable 20V to handle even the most demanding tools.
The design features dual power inputs (XT60 and a DC barrel jack) and correctly implements the third "T" terminal, ensuring full compatibility and safe operation with all your Parkside X20V Team tools.
Key Features
- Modular & Strong Design: Consists of a Main Body, a Top Slider for the tool interface, and a Bottom Cover. Assembly is secured with machine screws into brass heat-set inserts for maximum durability.
- Simplified Wiring: Utilizes a WAGO 221 lever-nut connector to make wiring the 'T' terminal and negative pole clean, simple, and secure.
- Full Tool Compatibility: Includes the third "T" terminal connected via a 10kΩ resistor to the negative pole, satisfying the tool's internal electronics.
- Dual Power Input: The main body has cutouts for both a high-current XT60 Male connector and a common DC barrel jack, giving you flexible connection options.
- High-Power Ready: Built around a large, finned DC-DC boost converter to effectively manage heat and deliver consistent power under load.
- Perfect Fit: Engineered to slide and lock into any Parkside X20V Team tool just like an original battery.
Bill of Materials (BOM)
- DC-DC Boost Converter: 1x 12V to 20V / 5A
- Power Input Connectors:
- 1x XT60-M Male Connector
- 1x DC Barrel Jack, Panel Mount [Specify size, e.g., 5.5mm x 2.1mm]
- Wiring Connector: 1x WAGO 221-413 (3-port Lever Nut) or similar.
- Resistor: 1x 10kΩ Resistor (1/4 Watt).
- Hardware:
- 8x M3 Heat-set Inserts M3 x 6.3 x 4.6 x 5.5
- 8x M3 Screws for Bottom Cover 8 mm
- 2x M3 Screws and Nuts for mounting the converter 12 mm
- Electrical Contacts: 3x Metal contacts for the tool interface (+, -, and T)
BX2091C Fuse Box Terminals Connector Terminals Car Insurance Terminals Automotive Meter Fuse Terminals - Wire: 14 AWG or 12 AWG high-quality silicone wire.
Printing Instructions
- Recommended Material: PETG, ABS, or ASA for heat resistance and durability.
- Layer Height: 0.2mm
- Infill: 30-40%
- Supports: Supports needed for the rail overhangs on the Top Slider part.
- Parts to Print: Main Body, Top Slider, Bottom Cover.
Assembly & Installation
⚠ SAFETY FIRST! ⚠ Working with electricity is dangerous. Double-check all connections, polarity (+/-), and settings before powering on. You are building this at your own risk.
- Print & Prepare Body: Print all three parts. Install the 4x M3 heat-set inserts into the corner posts of the Main Body. Use a soldering iron to gently heat and press them flush.
- Prepare Top Slider:
- Crimp wires to your three metal contacts (+, -, T) and insert them into the slots on the Top Slider.
- Take the Negative (-) wire and the 'T' wire and connect them to two ports of the WAGO 221 connector.
- Insert the two legs of the 10kΩ resistor into the same two WAGO ports, bridging the 'T' and Negative terminals.
- Wire Main Body Inputs:
- Mount the XT60 and DC barrel jack into the side of the Main Body.
- Crimp the positive (+) and negative (-) terminals in parallel (red-to-red, black-to-black). These are your main input wires.
- Install Converter:
- Mount the boost converter inside the Main Body using M3 screws and nuts.
- Connect the main input wires to the INPUT+ and INPUT- terminals of the converter.
- Final Wiring Connections:
- Connect the Positive (+) wire from the Top Slider to the OUTPUT+ on the converter.
- Connect a new wire from the third, empty port of the WAGO connector to the OUTPUT- on the converter. This completes the negative circuit.
- Final Assembly:
- Slide the completed Top Slider into the top rails of the Main Body.
- Carefully tuck the wires inside and attach the Bottom Cover using the four M3 screws.
- Test: Measure if your output voltage is at 20 volts.
Your adapter is complete! Slide it into your Parkside tool and enjoy your new limitless power source.
Important Note on Battery Protection: This adapter does not have a low-voltage cutoff (LVC). If using a LiPo or Li-Ion battery as your 12V source, you are responsible for monitoring its voltage to prevent over-discharge, which can permanently damage the battery and create a fire hazard. Use a battery with a built-in BMS or an external low-voltage alarm for safety.