Filament Dust Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the legendary Sneakypoo's filament dust filter, with versions for different tolerances.
- Ocena
- 4,857 / 5
- Polubienia
- 993
- Pobrania
- 3449
- Wydruki
- 36
- Wyświetlenia
- 14 430
- Oceny
- 35
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
See also my other remix with a magnet!
This was probably one of the very first models I ever printed, and the design was (and still is, in my opinion) just perfect!
The issue with the original Sneakypoo's model was that the tolerances were far too loose for modern printers, causing the parts to come out wobbly. So, I made a remix with multiple tolerance options, allowing you to choose the one that best suits your setup.
Just cut out two small pieces of sponge and place one in each half. Now you can insert and remove the dust filter even with the filament already loaded.
Print-in-place with 0.20mm layer height or finer. I usually print T100 tolerance version in Prusament PETG on a Prusa CORE One with 0.40mm HF nozzle.
See also my other remix with a magnet!