1 / 2
StarLink Wall Pass Thru 9.5mm bore and 8mm bore x 18mm O.D. — zdjęcie 1
1 / 2

StarLink Wall Pass Thru 9.5mm bore and 8mm bore x 18mm O.D.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a two piece wall pass thru for Cat 8 StarLink Cable that passes from the inside of your home to the outside.

Ocena
0 / 5
Polubienia
7
Pobrania
38
Wydruki
0
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a quick and dirty design for installing the Cat 8 cable that StarLink ships with it's new Standard Gen 3 kits. This will keep your house weathertight where the cable passes from the inside of your house to the outside. One model has a 8mm bore the other 9.5mm bore. The 8mm bore is for the 50' Cable supplied with the standard kit, the 9.5mm is for longer larger  aftermarket cables. These are made to fit snugly (more or less) in a ¾" or 19mm hole. The slot and slot filler are snug fitting into each other but you may need to adjust it for your printer for best results. The wall thru and the slot filler just need a little bit of caulking to hold everything in place. Place the slot at the 12 o'clock position, then insert the filler. Caulk around outer parameter to keep it weathertight. Peace…. 

Tagi