Washer fluid lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Washer fluid lid, for cars, 55mm diameter. Peugeot Partner, Citroen Berlingo and other models
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 607
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Washer fluid lid for cars, 55mm diameter, Peugeot Partner, Citroen Berlingo and other models.
The lid keeps the washer fluid safe for dirt if you are missing the original lid. Designed to fit direct on filler-neck. Fits well, a bit hard to press on and remove. It might be to airtight to let air in as fast as fluid is used. If its to tight it can be filed or scaled, or by drilling a small hole to let air in. Testdriving are not finished yet. The hole in the lid is for a thread if somebody like to fasten it.
The stl is without text to be used in any language. Symbol is indicating washer-fluid.
The lid is designed to print without support and with the top of the lid down.
I used PETG 15% infill. The pictures shows Prusament in Prusa orange color. Recommended color are blue, like the original color. (The pictures shows the first testprint to test size, and it fitted at first attempt.) I recommend using the stl file and your own settings for your printer and filament.
If you like it, please click like and upload a make. A comment and rating will also help other users. I hope this lid can help you too.