1 / 16
LabQuest 3 Stackable Stand (V3, Deprecated) — zdjęcie 1
1 / 16

LabQuest 3 Stackable Stand (V3, Deprecated)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deprecated V3 revision of a stackable stand for the Vernier LabQuest 3 device. Fits a little loosely, but still works.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
2
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is the V3 revision of a stackable stand for the Vernier LabQuest 3 device I made for a club project.  This fits the Vernier LabQuest 3, but one may find it is a tiny bit “loose” with respect to a bit of side-to-side movement.  Also this could be used as a very spacious tablet or phone stand, although that is not the original purpose of this 3D model.

As this wasn't the final design revision, this model as been marked as deprecated: although it still works to hold a LabQuest 3 device, the fourth and last revision is considered the in-production model.

There are 5 different sizes for the front shelf, which only affect how tight the fit is against the flat back of the stand for the LabQuest 3.  The sizes are:

  • 37mm
  • 38mm
  • 40mm
  • 42mm
  • 45mm
Thanks

Thanks to "The Machinist" for input that suggested making about 1cm wide “test strips” to test the fit of the stand against the battery.

Tagi