Qidi Q1 Pro (250x250) Shelf 4 PEI Holder FR4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is under-shelf 4 PEI holder for my Qidi Q1 Pro plates. For a 250x250 PEI, supports thicker plates, like 1.6mm
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Hi there!
This is under-shelf 4 PEI holder for my Qidi Q1 Pro plates.
For a 250x250 PEI, supports thicker plates, like 1.6mm
Can fit on Qidi Q1 Pro plate on 45°
There is a Left and Right part, and an Installation Template, which, unfortunately, can't fit on Q1 Pro build plate, but you can print it on a bigger printer (use STL Template), or cut with the laser from a scrap cardboard (use DXF Template).
If you can't print a template: 245 mm between Left and Right holes, 158 mm between Front and Rear holes.
PS: this is not a remix, but the idea of such a nice mount is not mine but this guy's 😁
https://www.printables.com/model/90215-best-pei-sheet-holder-for-ikea-lack