Speediance Gym Monster Bluetooth Ring Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixed version of the Speediance Bluetooth Ring Holder by Jeff Nee.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is a cutout for fitting a USB-C through the bottom to charge the ring. However since everyone's USB-C cables are different you'll need to customize the rest of the cutout to fit your cable.
The holder itself can be either stuck to the Gym Monster or have a magnet affixed to it. If you go the magnet route, use a 2mm thick neodymium magnet to avoid it moving around as opposed to the black 1mm “fridge magnet” sheet material.
The design is long enough that the ring can rest in the holder without needing to charge it.
One other caveat is if you print it standing upright, the long column that touches the bottom black part of the button is fairly weak because of its print orientation. Add a modifier in the slicer to make that section 100% infill. As long as you don't press on it too hard it should hold up to normal use.
Size: 26.9257 x 45.0404 x 27.8491