1 / 10
Philips OneBlade 1-piece razor (lazy) case V2 magnetic sliding lid — zdjęcie 1
1 / 10

Philips OneBlade 1-piece razor (lazy) case V2 magnetic sliding lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Philips OneBlade 1-piece razor (lazy) case V2 magnetic sliding lid

Ocena
0 / 5
Polubienia
11
Pobrania
40
Wydruki
1
Wyświetlenia
332
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

2nd version of my Philips OneBlade 1-piece razor (lazy) case with a magnetic sliding lid and much more space usage inside the case with a few other improvements.

 

After print actions:

The case closes strongly and easily held by 4 pieces of 6x3mm round magnets. They are pressed into the case after printing. Check their orientation before adding them to the case, so that the case closes.

 

Parts needed:

 

Printing instructions:

  • 0.2 speed profile.
  • No supports needed.
  • No brim needed.
  • To get the texts in a different color add a color change to the top part after 1mm print height and after about 2.4mm again to the desired color. To read how such a color change is done, you will find a really good article here.
  • Fuzzy skin paint on option used too to give it a little more grip to be removed.
  • Optional: Add extra texts to the base part if you want to in Prusa Slicer

 

Happy printing =)

Tagi