Turtle Beach VelocityOne Flightstick - Hats and Throttles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a broken one and found out that there are no 3dprintable hats/throttles. So i did model a few.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
I ordered a broken VelocityOne for 20bucks from the UK, my reason being to find out whats wrong with it and repair it.
Turns out its totally working.
But it came without any hats or throttlegrips.
So i designed a range of them and decided to upload them, for everyone who is in the same boat or just wants some different hats/throttles.
If you have more ideas, please post them!
Printing tips:
- use paint-on supports and let the center hole without supports! Every single one is designed so you can snap off the outer supports and then end with a hole pressfitting to the hat/throttle
- if that doesnt work out: the digital hat has a 5mm thick “pipe” in the middle. If the print doesnt want to go onto it, just drill it out with a 5mm drill. The analogue hat to the right is a 1.5mm by 1mm stick, just use a 1.5mm drill to open it and it will work out
- the Hats/analogue Hats are pressfit, the throttle/levergrips are not. Here you need to add a stripe of paper or tape on the lever.
Tidbits:
- the throttlegrip v1/v1_long is modeled roughly after the grips on the Velocityone Flightdeck
- throttlegrip v2 and v3 are basically the same, just centered and offcenter, just what you like better
- i decided to model 4 hats and copy them to the other mounting option, so you can mix and match on the 4way-hat and the analogue one just like you want to.
I also made a 3dprintable handrest:
https://www.printables.com/model/1360136-turtle-beach-velocityone-flightstick-handrest-lr