Bicycle rack rear light mount for LocaTag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for "LocaTag" 36 mm circular tracking devices, for bicycle rear lights with 50 mm bolt spacing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an enclosure for cheap tracking devices commonly sold as "LocaTag" with a 36 mm circular design. The enclosure mounts to rear lights on bicycle carriers that have a 50 mm bolt spacing with 5 mm bolts.
Make sure there's a bit of space behind your rear light mount, some bike racks like the Racktime LightIt have a curved mount that won't fit this (I figured this out too late… oops).
I test-printed both parts flat-side down with PLA and supports enabled, it turned out alright, although a bit rough on the support surfaces.