Rugged Box for GCG cards and Han Studio's cards and accessories box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using the Whity's brilliantly parametric designed box to house my GCG card and accessories box holder.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a way to transport my cards, and nothing is better than Whity's rugged parametric box!
This has been altered to accomadate my Gundam Card Game Dice and Token Organiser and a card holder included in this upload. The card holder has two sections: main deck for 50 sleeved cards, and auxiliary deck for 24 sleeved cards. (I play with Striker pack and White base: 10 resources, 1 ex base, 1 ex resource, 6 striker token cards, 6 white base token cards).
You will need 6x M3 30mm screws, I used Kozelo Socket Head Cap Screws [M3-0.5 x 30mm] on Amazon.
The inlay is printed seperate and intended to be glued on afterwards. To maximise accuracy, make sure to print outer/inner, split it into 2 parts, and print by object. If you want the texture from your build plate facing up, make sure to flip the inlay the other way up.
If you have an AMS, i have also included a combined version, just remember to paint the logo a different colour!
Not needed, but i also added some very thin stickyback velvet fabric on the bottom and tops of the inner volume.
I'll be adding more logos/emblems to the lids over time!