1 / 1
Xenoblade Trinity Core Coaster Set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of coasters styled after the trinity core from the Xenoblade series.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It is recommended to print all parts in PETG or a more temperature resistant material. All models are print in place with no supports. You will require a printer capable of printing 5 colors.
My Prusaslicer project file is provided for convenience for those who have an XL.
Print time for an entire set on a Prusa XL: 11 hours
Main Coaster:
- Colors: Black, Gray, Translucent Green, Translucent Red, Translucent Purple
- Most colored regions are delivered as parts. Any gray decals on the upper surface must be added with the multi-material painting feature of the slicer.
- It is recommended to set the crystals to 100% aligned rectilinear infill to ensure a better end appearance. (Makes them look more like solid crystals) If you use non-translucent filament for the crystals, this does not apply.
Holder:
- Sized for 6 vertically stacked coasters.
- The gray stripe is added in the slicer.