Volkswagen 020 Transmission Shifter Cable Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Modeled this after the stock spacer, in the hopes of getting a stiffer clutch pedal feel. It seems to be pretty…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I Modeled this after the stock spacer, in the hopes of getting a stiffer clutch pedal feel. It seems to be pretty successful so far. I made a few versions, but this is the final version thats on my car now. It definitely improves pedal feel, and is very strong. I printed using PLA at 195C and 60C on the print bed.
Print Settings
Printer:
Davinci 1.0 Prusa Hot end
Rafts:
No
Supports:
Yes
Resolution:
.1
Infill:
90%
Notes:
I printed this at a very high infill to make it as solid as possible. Depending on your printer will depend on how well it handles the supports. I ended up having to do a little bit of clean up to get it perfect.
Category: Automotive