Volkswagen ABA Valve & Springs organizer Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to keep all my valves and springs organized and in order while I ported my Cylinder head so I made this…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to keep all my valves and springs organized and in order while I ported my Cylinder head so I made this little tray to hold everything. You print it in two halfs, and Epoxy them together after printing. Printed using PLA at 195C and 60C on the heated bed.
Print Settings
Printer:
Davinci 1.0 Prusa Hot end
Rafts:
No
Supports:
No
Resolution:
.1
Infill:
15%
Notes:
This barely fit on my Davinci 1.0 Print bed. The object isn't scalable based on the holder being measured to fit the valves. To print both sides, just mirror it in your 3d printing slicer software.
Category: Automotive