Ford IAC 1/8th NPT Adapter Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick design of a flange to fit on the early ford idle valves. It converts the port size totappable 1/8th…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a quick design of a flange to fit on the early ford idle valves. It converts the port size to tappable 1/8th NPT holes for easy adaptability. Its not perfect, but it worked great for my project. I Printed using PLA at 195 C, with my heated bed at 60 C. I hope this helps some people out, or sparks more ideas for this idle valve. This valve is the perfect candidate for standalone tuning, which is where I incorporated it for my project.
Print Settings
Printer:
Davinci 1.0 Prusa Hot end
Rafts:
No
Supports:
Yes
Resolution:
.1
Infill:
50%
Notes:
I used supports and a raft to help support the chamfered underside of the ports. If I were to print it again, I probably would eliminate the raft, so it gets a very flat surface on the print bed.
Category: Automotive