Anti-Pigeon/Cats Spikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular anti-pigeon/cats spikes (20×3.5×4 cm) with 3×14 sharp cones.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These modular anti-pigeon spikes are designed to prevent birds from landing on fences, railings, balconies or similar surfaces. Each module measures 20 cm long, 3.5 cm wide and 4 cm high, and features a 3x14 array of sharp conical spikes.
Extremely effective due to their very pointy design. Originally intended to keep pigeons away, I also used them successfully to stop my cat from climbing over the balcony – they work perfectly.
Designed for FDM 3D printing
Recommended material: PETG or other weather/heat-resistant filaments
Do NOT use PLA outdoors
Suggested infill: at least 80% for strength
You can print as many as you need and align them side by side for longer sections.