JetKVM 19-inch rack mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular, 2-part, 19-inch rack mount for the JetKVM.
- Ocena
- 4,5 / 5
- Polubienia
- 38
- Pobrania
- 272
- Wydruki
- 2
- Wyświetlenia
- 1807
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular, 2-part, 19-inch rack mount for the JetKVM. I made this model in 2 variants. For 2, 3 or 4 JetKVMs per module. The 2 and 3 KVM variants also has versions with keystone slots.
This mount is part of a 19-inch modular rack mount system I designed. You can mix and match the modules with other mounts. Take a look at my models here to find out the other 19-inch mount modules.
Do you like my models? Consider buying me a coffee ;)
Required parts
- 2x M2x12mm screws per JetKVM.
- 3x M5 screws (Min size: 12mm, Max size: 16mm).
- 3x M5 hex nuts.
JetKVM Assembly instructions
- Remove the two M2 screws from the top of your JetKVM.
- Insert the JetKVM into the mount, and align the screw holes from the mount with the screw holes from the KVM.
- Insert the 2x M2x12 screws and tighten them.
Mount Assembly
OBS.: The modules used in this tutorial are only for illustration purposes, and I'm using them for the whole series. It might not reflect the models you download from this page.
- To assemble the parts, insert the 3 screws into the Right module.
- Then align it with the Left module.
- After that, insert the hex nuts in the screws, and using a screwdriver or allen key.
- Tighten the screws until you start feeling resistance and the nuts are securely into place. After that, you can install the mount in your rack.
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
4 or more.
Infill:
20% or more.
Filament:
Any.