1 / 5
Soda geyser / Diet Coke and Mentos fountain (multiple versions) — zdjęcie 1
1 / 5

Soda geyser / Diet Coke and Mentos fountain (multiple versions)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn your soda into an explosive geyser with this fun Mentos trick using your 3d printer!

Ocena
0 / 5
Polubienia
13
Pobrania
362
Wydruki
1
Wyświetlenia
1233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

With this 3D print, you can turn any regular soda bottle into a spectacular geyser with just a few Mentos! If you are looking for a more cost efficient way you can also use carbonated water, add a bit of dishwashing soap and a tiny fraction of lemonade. 

Simply load 7 Mentos into the tube, secure them with a paperclip to keep them in place, and screw the tube onto a soda bottle (Diet Coke works best for maximum height). When you’re ready, pull the paperclip with a string and watch the Mentos drop—instantly transforming your soda into a powerful fountain!

I’ve included several models:

Small-hole and large-hole versions – the smaller hole builds more pressure for a longer-lasting, higher geyser.

Extended version – for experimenting with even more Mentos stacked up for bigger blasts or larger coke bottles.

There’s also an optional ring you can print, which sits above the paperclip. After you pull the clip, the ring falls down to cover the hole, helping control the spray.

For starters I recommend the Soda Geyser medium version extra strong grip - very small hole.stl file! 

Have fun experimenting—and don’t forget to share your results!

Update july 30th 2025 - Improved the grip on the ring that is used to tighten the nozzle. I also added another model with a even smaller hole. 

Tagi