1 / 8
Magic Rings a Game of Skill (SLA-Print) — zdjęcie 1
1 / 8

Magic Rings a Game of Skill (SLA-Print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had this from my childhood. Org. part was prof-made, I redid it with wire and welding skills. Maybe 50+ years ago.

Ocena
5 / 5
Polubienia
7
Pobrania
26
Wydruki
2
Wyświetlenia
262
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Now I redesigned it for (mainly) resin print. Version 1 could also be printed in FDM. 

Version 2 is almost full assembly and has thousands of supports. Maybe nothing for FDM. After removing the supports and smoothening the support-scars you are ready to go. Version 2 is much better in handling and operation.

Version 1: After print link all five Ring+Rod-parts, put the through the plate and apply the ball into the rods with some resin. Cure it. This should look like picture #2, where you see two parts: The infinity Rod and the rest.

That was the easy part. Now comes the assembly and disassembly of the two parts:

Good luck!

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Tagi