Holder for screw hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Something with hole for a small screw head but you don't wanna screw it somewhere? Tape it with this!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to place a modem on the back side of a TV, but just glueing it woudn't cut it. So I made this! You just need to have a shorter screw with bigger head, put doublesided tape on the back and you can place your thing anywhere!
Printing instructions
Layers: 0,20 mm
Infill: cca 20%
Material: Depends. ASA or PETG
Support: No
Assembly instructions
Put double sided tape on the back and have some screw and put it in! You can just use a screwdriver, it goes nicely in.
I would reccomend put the ,,mount'' on your thing and then peel it and stick it on it's place, you have it on the right holes.