Duplo Railway waggons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duplo compatible train waggons
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
BOM:
- 8 M3*3….5 Heatsinks (short or voron) inserts
- 8 M3 * 15…18 Conehead screws
- 2 4mm diameter * 52 mm length Steel axle from 4mm steel stock (may also be made from brass or in emergencys from aluminum or carbon fiber rod, or printed)
- 4 “Raeder_4x_wheels_4x” ==> Best printed in ASA
- 1 “Coupling_Kupplung” ==> Best printed in ASA
- 1 “waggon_lower_zug_unterseite” ==> Best printed in PLA or PET-G
- 1 “waggon_mid_zug_mitte” ==> Best printed in PLA or PET-G
- either cover with all 8 M3 Heatsinks ==> Best printed in PLA or PET-G
- Gluing aid is optional (but will help)
==> Degrease the axles and glue all 4 wheels on the two axles by gluing them in and showing them into the gluing aid
==> Place axles with wheels on “waggon_lower_zug_unterseite”, put “Coupling_Kupplung” onto it, put either cover with all 8 M3 Heatsinks onto it and screw everything together.