1 / 4
Magnetic holder for GLEDOPTO GL-C-008 LED Controller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case with Magnets for the ESP8266 WLED Controller Model GL-C-008
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case with Magnets for the ESP8266 WLED Controller Model GL-C-008
I removed the screw tabs and added 2 pockets for 10mm x 60mm x 2mm magnets.
You will want to add a pause at layer 16 to insert the magnets. Then start your print, and when it pauses drop 2 10x60x2mm magnets in the holes and resume.