Sovol Zero Build Plate Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A build plate holder for the side of a Sovol Zero. Attaches with 6 8x3mm press-fit magnets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a build plate holoder for the side of the Sovol Zero. This was inspired by @lion7718's solution to this problem (https://www.printables.com/model/1303999-sovol-zero-magnetic-buildplate-holder), but is my own design. I tried to use some similar design language to the Sovol printers, with angular edges and light indenting. And I thought it would be fun to call it Zed, rather than Zero.
Print on the angular edge to minimize suupports needed. I only used supports on the upper hexes to provide some stability for the print.
Since Sovol Zero build plates are not yet available from other suppliers, I'll likely remix this in the future to support using the Ender 2 / Adventurer 3 build plates that are nearly the same size (but you do have to modify the prionter to make them sit level).
I printed mine in Polyterra (Polychroma now?) muted matte blue PLA, as it is a pretty close match to the stock inmmjection molded plastic. Thanks @Dan_796666 for the suggestion on color!