1 / 4
Vise Jaw Clamps for Tubes, Dowels, Rods - Vertical/Horizontal -Metric and Inch — zdjęcie 1
1 / 4

Vise Jaw Clamps for Tubes, Dowels, Rods - Vertical/Horizontal -Metric and Inch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use these to clamp cylindrical items in the vise without crushing or marring.

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Assembly and Use

These clamp blocks are designed to be printed in pairs in a size matching the object you want to clamp. Included are all of the typical sizes for wooden dowels; these will of course also work for metal or plastic rods, tubes, and similar items. If you need to clamp a cylindrical object in a size that is not included, simply choose the model that is closest in size to what you need and scale it to match the exact size you need.

Larger Sizes - Two Versions

The clamp blocks were initially designed for use with a 6" (150mm) width bench vise with jaws about 20mm in height. This required that the design for larger sizes (13mm or 1/2" and larger) be modified to work well with the 20mm high bench vise jaws. When using a wood vice with higher jaws, however, the same basic design can be used for all sizes (see photos).

The following sizes are provided :

  • Metric (mm) : 3, 4, 5, 6, 8, 10, 12, 16, 20, 25
  • Inch : 1/16, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1

For file naming purposes, for the inch sizes I used the truncated decimal equivalent as this makes it easier to compare sizes, and the enables the file names to sort properly by size. The decimal sizes are truncated in the filename, but the actual fractional inch size is used in the model. On the printed model itself, the fractional inch size is printed. Here are some example file names :

  • 10mm : ClampV-10mm - Clamp.stl
  • 3/32 in : ClampV-.09in - Clamp.stl
FRACTIONAL
INCH
DECIMAL
INCH
 FRACTIONAL
INCH
DECIMAL
INCH
1/16.06 7/16.43
3/32.09 1/2.50
1/8.12 9/16.56
5/32.15 5/8.62
3/16.18 3/4.75
1/4.25 7/8.87
5/16.31 1.99
3/8.37   

 

Clamp blocks for holding in both the vertical and horizontal positions are included (see photos).

Note : I currently needed these in the 10mm size, that is the first size I printed and tested. I also printed and tested the 1" size. Since my CAD model is parametric I made all of the other sizes included here for possible future use.

Print Instructions

Print in PLA using the 3mf files provided, otherwise :

  • 0.2mm layer height
  • 3 perimeters
  • 20% rectilinear infill
  • output as separate objects

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/33bb6c420accc8e69969e118/w/d4cdadc9bb24d3a2b45f96c1/e/8d50afccd6e9ce0ced2c3ea5?renderMode=0&uiState=687e4d613ea08e583e117afe