Holder to mount a Raspberry Pi on the iOptron Tri-Pier Column tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder to mount a Raspberry Pi on the iOptron Tri-Pier Column tripod
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v3.0
After equipping my iOptron CEM70 mount with a USB-3 hub, the Raspberry Pi (RPi 5) had to be fixed somehow so that it wasn't constantly hanging on the cables.
Printing
PETG is recommended, weight ~ 55 grams.
Nozzle 0.4 mm, Layer height 0.3 mm, 3 wall lines, auto brim or mouse ears, infill 10 % but doesn't matter as there is very little infill.
Modifier necessary! See pictures. Overhang lines and an overhanging wall are very close.
- Setting “Bridge Counterbore hole” to “None” is important for the overhang lines of the pockets (connectors and cooling air flow)
- Setting “Bridge Counterbore hole” to “Partially bridged” for the wall at the end of the straight guidance is necessary - otherwise lines will be printed “into the air”.
Assembly
Screw the holder/mount onto the tri-pier tripod at the M4 Hexagon socket button head screws. You can use the existing ones.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work