VW/Audi MK4 TDI filter wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed an oil filter wrench for my 2001 Golf TDI so I decided to make one.The wrench has 14 flats and with either 74mm…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Needed an oil filter wrench for my 2001 Golf TDI so I decided to make one.
The wrench has 14 flats and with either 74mm or 75mm diameter. Probably fits many other VW and Audi models as well. The 74mm version is a pretty snug fit on my MK4 TDI, if your printer tolerances are not very tight you may want the 75mm version for a better fit.
I recommend at least 4 perimeters for strength. I printed mine at 0.32 layer height with 4 perimeters and 20% infill with PLA and it seems plenty strong enough.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Category: Hand Tools