1 / 5
3HOME: SKR Pico Enclosure remix - ALPHA — zdjęcie 1
1 / 5

3HOME: SKR Pico Enclosure remix - ALPHA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified full bottom enclosure for the SKR Pico board NOTE: This is in Alpha, has not been tested

Ocena
0 / 5
Polubienia
4
Pobrania
23
Wydruki
0
Wyświetlenia
206
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Decided to make an enclosure for the SKR Pico board to be used with the 3HOME 3MS system for 4 filament units

THIS IS IN ALPHA - I have not tested this yet, but if someone else wants to give it a shot, please let me know if you have any feedback

There are 2 different ways to print and assemble this, depending on your bed size:

  • If your printable area is 250mm+, I recommend printing 3MS_full_skr-pico_v1.stl
  • Otherwise, print 3MS_lefthalf_skr-pico_v1.stl and 3MS_righthalf_skr-pico_v1.stl. Fitting both halves together should be similar to how the filament units come together

Since this enclosure has 4 more mounting points to securely attach to left joiner, right joiner, and middle joiner, additional screws and nuts could be added:

  • 4x M3x30 SHCS
  • 4x M3nS