1 / 3
Belt clip for QWare Walkie Talkie (QW SND-WT335BU) — zdjęcie 1
1 / 3

Belt clip for QWare Walkie Talkie (QW SND-WT335BU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After breaking the original (see first 2 pictures), i had to create a replacement.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

I created this after the original broke (see 2nd photo).
No supports are needed, as i added them in the design (to help with the bridging).
They easily break away.

The grooves on either side might need a little filing down, depending on your settings… but it should all be a snug fit.

I also made the base a little thicker, to prevent breaking of the clip.

This is version 3 of the design.
I had some measurement mistakes in the first 2 (like the height of the grooves), so i just filled them in in Blender and created new grooves.
It's not my best work, but it will get the job done.

I printed this using: 
0.15mm layer height
standard 0.4mm layer width
20% infill (although 100% might be better)
Minimum of 3 walls is required, for strength.

Print as oriented in the stl file (see 3rd picture).
 

Tagi