1 / 2
Sojag Genova Gazebo Leg Powerstrip Wire Clip — zdjęcie 1
1 / 2

Sojag Genova Gazebo Leg Powerstrip Wire Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds a power strip wire securely to the outside corner of the gazebo leg

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to put a power strip tucked up inside my Sojag Genova gazebo to power lights and a Sonos speaker but didn't want the cord just danging.   I printed it out of PETG at a .2 layer height.  4 perimeters, 5 tops and bottoms and 40% infill using a .4 nozzle.   I gave it a really light fuzzy skin for good measure to dull down the PETG shine a little.   It gives a very satisfying snap at it locks into the extrusion grooves.  6-8 of them is a good number to print depending on how straight or not your cable naturally hangs. 

Tagi