1 / 3
Philips Hue Light Strip Clip - 10x3mm magnet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to accept a 10x3mm magnet in the base
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 65
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For me, the 10x3 magnets were all a snug press-fit and no glue was required. But if they are loose or you want a little more security, a bit of CA glue will do the trick.
I used these to mount a Hue strip inside my Prusa Mini enclosure.
Remixed using PrusaSlicer! 3mf included in case you want to change the shape of the negative volume.