Meshtastic FakeTec "RUCKSACK" super slim phone node
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just like a Rucksack this node lives on the back of your Phone, slim, long lasting, practical .
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 3581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPFRONT!
I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other channels are ONLY for my thermal builds!
_________________________________________________________________________________________________________________________
You have three options when it comes to the top cover, a plain one without anyhting, one with a Meshtastic PWRD logo, and also a dual color variant for multicolor printing.
Once you placed the Faketec in the base use a piece of whatever you got and shove it between the top left gap between the faketecs PCB and the screw post. This needs to be done so the board does not move upwards when you connect the USB C cable to the lower side, preferable something non conductive!
The Rucksack as simple as it gets, using only a battery, antenna and a main power switch. The reset button is accessible through a punch-out in the top case and can be pressed with a thin pin.
Parts list:
FakeTec DIY Meshtastic Node: preferable V5 or V5 rev. B
gargomoma/fakeTec_pcb: A low-cost nrf52 device.
Power switch:
Lipo Battery with BMS
Screws: M2,3 4mm
Antenna: ( Choose frequency depending of your countries regulation)
Heltec Federantennen-Zubehör - AliExpress 30
A piece of transparent 1,75mm Filament as optical fiber.
Double sided sticky tape.
Metal drill bit ( 6mm) for countersunk screws. turn by hand until the screws go in almost flush to the surface on the top cover.
UPDATE 25.08.2025
Added a variant with foldable antenna.