JBL Charge 3 CLOSED SIDE (damaged passive membrane)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Close a cut open membrane on the side of the speaker. Pretty quick fix
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Ever had to discharge water from an 9 year old speaker because you thought it is water proof? Well you are at the right spot… kinda. The battery compartment was once damaged a long time ago due to throwing it around, thus making it water absorbing.
Steps to reproduce:
- Break some plastics inside during the lifetime of the speaker
- Throw it in a river
- Let the speaker squeak into death
- "hmmm the speaker got heavy, I think there is water trapped inside"
- cut open the passive side membrane with a knife
- drain the speaker
- take it home and take it apart (completely)
- dry it at home with a dryer for about 1 hour (especially the battery, do not apply heat)
- put everything back together
- it should work just “fine”
Now since the chamber needs to be closed to make the speaker sound somewhat good, the cut open part needs to be closed.
What to do:
- Print this thing
- glue it on the side (with the hole obviously)
- use a lot of glue
Don't throw this speaker in the water next time!
AND TAKE THE SIDE COVER COMPLETELY OFF WHILE GLUEING TO NOT GLUE THE INTERNALS!
also it seems to have some sort of broken geometries, but it should print fine I think.