1 / 7
Corner pads for clamps - Action (brand) Clamps 43 x 30 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp mounting pads for precise right angle assembly. Internal dimensions are 30.5 x 43.5 x 2 mm. There are two sizes.
- Ocena
- 5 / 5
- Polubienia
- 483
- Pobrania
- 964
- Wydruki
- 3
- Wyświetlenia
- 5570
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 11)Remiksy (0)Kolekcje (687)Powiązane
Clamp mounting pads for precise right angle assembly. Made for Action (brand) clamps, but this size will fit other similar ones. Internal dimensions are 30.5 x 43.5 x 2 mm. There are two sizes. The larger one for large parts has a height of 60 mm and the standard one has a height of 30 mm. If there is a lot of interest I can create other models in other sizes.
Print from PLA, PETG.
- Easy to use
- Strong enough
- Filament saving
- Best print at draft 0.28 layer, 15 % Gyroid and 3 perimeters
Just print and enjoy it :)
