Stand/Base for Wagner HT1000 heat gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed base to secure hot heat gun
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 595
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Simple remix of nalanengine's base for the Wagner HT1000 heat gun. Great way to secure it when it's hot. The base simply slides onto the back end of the heat gun.
The original is great, but its hollow base may be aesthetically pleasing yet makes no sense for an FDM printer as it requires supports and actually results in longer print time and material use.
I remixed it to make the base solid, so it's a more sensible print.
Print Instructions:
Prints great with 0.6 or 0.8 nozzle.
I printed it with a 0.8mm nozzle, 0.3mm layer height, 15% gyroid infill, PETG. I used supports for the small protrusion on the inside. See picture.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.