Flimsy Curtain Rod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal curtain rod bracket for 1-inch PVC pipe – print in minutes, mount in seconds.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
A super-lightweight and functional curtain rod holder designed to reuse standard 1-inch PVC pipe as the rod. Perfect for lightweight curtains, DIY room dividers, or closet covers.
🟢 Designed for Recessed or Flush Surfaces
The holder has two flat sides, allowing it to be mounted securely in corners, recessed shelves, cabinet walls, or flush surfaces without needing any protruding hardware.
🟢 Minimalist & Eco-Friendly
Instead of buying new rods, just use a standard 1" (25.4 mm) PVC pipe — easy to source and cut to length!
Features
- Fits 1-inch (25.4 mm) PVC pipe
- Dual flat-sides for flush corner/recessed mounting
- Uses very little filament – optimized for fast prints
- Can be printed without supports
- Ideal for temporary, rental-friendly, or lightweight curtain setups
Mounting Options
- Double-sided tape
- Screws (add holes on modal as needed)
Print Settings
- Material: PLA / PETG
- Layer Height: 0.2 mm
- Infill: 15%
- Supports: No
- Brim: No
- Perimeters: 3 walls