ABS Replacement Dishwasher Tray Wheel for KitchenAid, Other Washers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement dishwasher tray wheel designed for use ONLY WITH ABS FILAMENT that should fit KitchanAid washers
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I designed this wheel and pin as a direct replacement for the lower tray wheel on my Kitchenaid washer. This part MUST be printed in ABS or a similarly heat resistant filament, or it will deform and melt from the hea inside the washer. PLA and PETG will melt.
Apparently washer trays from a variety of brands including Kitchenaid, Maytag, Whirlpool, and Kenmore utilize this same design. Take a look at the images to see if your washer tray trolley design resembles the one shown and this wheel may be compatible if so. I have included dimensions that you can reference to check if the wheel matches the one on your washer.
These wheels are held on just with the pin as shown. You can use a screwdriver to press out the old pin. Be aware that this new pin is fairly tight, so you may need a pair of pliers to install it. You should hear a loud click when the pin is fully seated.
If you like the look of my work and have something you need designed, please feel free to send me a message through my profile. I am an experienced freelance engineer specializing in product design for 3D printing and injection molding, and currently open to taking on projects!