Faketec beeper case for Meshtastic / pocket and desk versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact case for a faketec Meshtastic node, reminiscent of old pagers. No buttons, no screen, 3000mAh battery.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 422
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I missed a beeper/pager inspired node with an external antenna connection and even bigger battery. I disliked the way P4GR holds the lid, so I remade it from scratch. You'll need 4x 3mm screws that will self-taper onto plastic, minimum 5mm long, and 2x M2 for the power switch.
Designed for a 103565 LiPo battery like this one.
Battery is contained on the lower level and the tray holds the board.
There's 2 versions of the outer box and lid: normal for pager design, and *VERT for the desktop version. Normal is more stable than I expected, but VERT is even better.
Print everything flattest side down, you'll need supports (everywhere) on base* and bandeja.