Formlabs SLS powder storage container funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel that helps to transfer SLS powder into sealed storage boxes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
In order to transfer SLS powder from a Formlabs Fuse 1/1+ into a sealed storage box I made this funnel. The funnel locks into the opening of the storage container. It allows to insert the powder cartridge on top in the same way that you insert it into the powder hopper or it just helps to have a bigger opening and therefor less spillage when pouring in powder in any other way.
This way I store the powder through periods of low usage. And since formlab's SLS powder now comes in 10kg powder packs instead of 3kg bottles as before, I also started to store the new but not yet inserted powder in these sealed containers.
The storage container I use and this funnel is design for is made by LocknLock and is available on amazon: https://www.amazon.de/dp/B00407N0C4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I used the following model https://www.thingiverse.com/thing:6163643 by bikenerd for the dimensions of the ending that connects to the formlabs powder cartrige. A big thanks goes out to this user over on thingiverse!