1 / 2
Snap-In Fan Shroud for Prusa i3 MK3S(+) Reduced height Won't get stuck hot bed version — zdjęcie 1
1 / 2

Snap-In Fan Shroud for Prusa i3 MK3S(+) Reduced height Won't get stuck hot bed version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the one I modified so that the print won't get stuck on the heated bed.

Ocena
0 / 5
Polubienia
1
Pobrania
37
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The original design of the device would get stuck on the heated bed when I used it, so I redesigned it to reduce its height to avoid scratching the heated bed, as shown in the second picture.

Just use PETG to print. I print 100% density.

Please refer to the original designer's post for assembly instructions.

https://www.printables.com/model/76999-snap-in-fan-shroud-for-prusa-i3-mk3s