1 / 1
2025 Science Olympiad Tower Jig - Bonus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament conservative design idea to make a jig for the 2025 Science Olympiad Tower event.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Standard Digital File License
The jig design aims to minimize the amount of filament used by your printer when printing a large (otherwise full of infill) jig. The use of this specific jig will not be very useful in years following, but the design can be modified. some of the things that makes this design efficient are listed below.
- The jig design utilizes bridging a technique used by printing material at slight offsets from one layer to the next. This tower uses this by eliminating whole triangles of material that would otherwise need to be filled in. The angles don't exceed 45-50 degrees to ensure smooth printing because bridging isn't very reliable on most printers lower than that.
- The tower jig has fins this allows for less material to be used because there is less need for infill and the area of printing is less.
Good luck!