Printable Dek Hockey Goalie Sliders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliders to attach to the inside of your pads to slide like ice for goalies for Dek, Roller, and Ball hockey.
- Ocena
- 0 / 5
- Polubienia
- 7
- Wydruki
- 1
- Wyświetlenia
- 796
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Update: Durability photos after 2 months of playing 3-6 games a week. No signs of cracking or damage. They were sliding better after wearing down a bit after 2 weeks. https://imgur.com/a/A28iIbd
Update #2: Should have expected this, but the sliders have a cracking risk if you're playing outdoors in subfreezing temps. Had the corner of one of the square plates crack on the first set I made on a particularly cold night. The slider "bubbles" themselves are still fine and holding up nicely, even with the chipped corner. The nice thing is I just had to reprint one piece for my goalie and recommended he wait till it gets warmer to swap out the chipped one.
Update #3: Uploaded a new version of the 7 bubble slider with a slightly smaller base plate because it hangs over the flap slightly on some pads. I thought I uploaded it months ago when I made it. Also thinking about making a version with shorter bubbles, as 1 year in the original set isn't worn down much at all, so making them half the height might be worth the material savings.
Set of printable sliders for goalies to attach to your goalie pads. I recommend printing in ABS/ASA for strength and better sliding. PLA will work as well, but it is not recommended as they may deform on particularly hot days.
I printed the layers above 4mm (just the bubbles) at 100% infill and the baseplate at 25% infill. There is an included file that can be imported directly into Orca slicer that already has this height modifier in place (you will need to add additional plates). You can also print the entire pieces 100% infill for maximum strength/durability.
The siders can be attached using industrial Velcro strips or using the holes in each plate to screw into anchors. The holes are sized for #5 Flat head wood screws, and you will need to cut slits in the pads to insert the anchors for them to screw into. The anchors are fine to print from PLA.
Each pad used two 2x1 sliders, one 4x1 slider, one 4x2 slider, and one 7 bubble slider.
Mounting Hardware:
If you're printer is unable to print ASA/ABS or is too small (the largest piece is just over 9"), you can reach out to me on printables about having a set printed and shipped. This is just a hobby so I may not always be able to turn them around quickly.
Included links are Amazon Affiliate links. If you choose to purchase through these, they will support my projects at no cost to you.